Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 03502 | GENERAL ELECTRIC CO NAVAL AND DRIVE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 5.001 INCHES NOMINAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| ABHP | OVERALL LENGTH | 37.688 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.875 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.4965 INCHES MINIMUM AND 1.4970 INCHES MAXIMUM |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2450 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1045 |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 3.750 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY |
| CSPY | LARGEST STEP DIAMETER | 1.746 INCHES MINIMUM AND 1.747 INCHES MAXIMUM |